Skip to main content

Posts

Government Outreach is Paying Dividends for AEC Members

As we work on a new trade case, government affairs issues have taken center stage in recent weeks. AEC members have been working with their local elected officials and their staff over the last few weeks. In this effort we have applied pressure on these lawmakers to help us find resolutions in the Aluminum 232 General Approved Exclusions (GAEs), the surge in imports from Mexico (USMCA and 232), and the overall state of our industry as a result of these failed government policies. Since that time, Bonnell Aluminum hosted a visit to their Utah plant for Senator Mitt Romney. Western Extrusions has leaned on their representative to set up a meeting with key officials this month in Washington, D.C. to discuss our trade concerns with House Ways and Means committee staff. Taber Extrusions has initiated a Senate letter by their Arkansas Senator, Tom Cotton. Working with members, our lobbyists are circulating the letter for bipartisan support to ‘close the deal' on the Commerce Department...

Remember Our China Case?

 With all the focus in recent months on a proposed new trade case, it is easy to forget that we have a trade case against China.  So, I wanted to update you this month on the latest matters. Perhaps the most significant ruling was in the CCM Solar Mounting case.  We’ve recently reported this as a win in the appeals court, and it is.  The update is that the petitioners attempted to appeal this decision and it was thrown out by the appellant court in very harsh terms.  I‘m excited about this ruling because the decision being appealed contained language that confirmed that sub-assemblies are not final-finished products.  This is so important due to the number of cases we lost in the past on these grounds.  After a victory like this, it opens the door for us to look at previous losses on these grounds.  If we find such a decision, we could appeal it based on the latest court ruling.  A member might say, “So what, Jeff?  I don’t extrude solar...

Big Win for AEC’s China Trade Case

For all the recent focus U.S. extruders have had on a new trade case, we need to remember we still have an active trade case against China.  In that case, the AEC won a big victory at the Federal Circuit court last month in our solar mounting case. The Federal Circuit upheld the Department of Commerce’s (DOC’s) scope ruling finding that CCM’s solar panel mounts are covered by the scope of the orders and cannot be excluded as “finished merchandise.”  As you may recall, we actively opposed CCM’s scope exclusion request at Commerce and filed substantive briefs throughout this appeal to assist the Government in defending the agency’s decision.  The Federal Circuit agreed that the solar panel mounts are parts or subassemblies for a downstream product – the solar panel mounting system – and thus are not a finished product that qualifies for exclusion.  The Federal Circuit’s opinion makes clear that parts or subassemblies cannot qualify for the “finished merchandise” exclus...

A Gathering Storm Fueled by Disappointment

 You do not have to tell U.S. extruders what it feels like to be under a deluge of imports.  The industry went through this 14 years ago with China.  Now, it is happening again.  This has been a slow buildup starting back in 2018-2019.  After the Aluminum 232 began, we did see a dip in imported extrusions.  However, by mid-2018 the protection began to fade.  Just prior to the chaos brought upon us by the COVID pandemic, the U.S. government inexplicably dropped the extrusion tariffs and the flood gates started opening.  Since late 2020 we have seen the domestic market percentage of the U.S. market collapse to a level we have not experienced since 2010 – the last year before the China tariffs took full effect. We made every effort to thwart this trend.  When we identified imports as eligible to be covered by our orders, we made a scope challenge.  When we identified imports as transshipment or circumvention, we made an  Enforce and Pr...

The Data Tells the Story

 Over the last few weeks, the U.S. aluminum extrusion members in the AEC have been providing data to our legal team at Wiley Law.  Wiley has pulled the numbers together, and we are ready to update the members involved in the process.  To no one’s surprise, our industry continues to suffer escalating injury due to imports.  Now, having data through the third quarter of 2022, our next task will be to collect the fourth quarter’s data, too.  Everyone expects that data to validate a continuing deterioration in the domestic injury’s share of U.S. demand.  So, what is next?  The AEC will host a webinar on January 27th at 11 AM Central Time.  This meeting is for U.S. AEC Extruder Members only , and they can register for the event here .  In parallel to our efforts investigating a possible new trade case, we have been in ongoing discussions with the Department of Commerce (DOC) seeking the reinstatement of the Aluminum 232 extrusion tariffs.  At...

All Eyes on Imports

Over the last month, the Aluminum Extruders Council (AEC) has been collecting trade data and making an all-out push at the Department of Commerce (DOC) to have our Aluminum 232 aluminum extrusion tariffs reinstated.  We are working as fast as we can to find a path to relief while facing the twin threat of a slowing economy and rising imports.   AEC U.S. extrusion members have dutifully submitted data to our trade attorneys so they can aggregate the information and confirm the injury many of us are feeling.  Currently, we are wrapping up the Q3 data set, and after the first of the year, we will ask for Q4 results.  Our attorneys will continue to aggregate the results to determine two things: confirmation of injury, and the duties we would expect to win, should we prevail. Having already reviewed the data from our Sunset Review earlier this year, we know at this point that we do have a case.  However, the second piece of the puzzle is even more important, whi...

Time for us to Rally Together!

 Last month I held an emergency webinar to discuss breakthroughs in our 232 aluminum tariff discussions with the Department of Commerce (DOC).  Efforts to get our message to the DOC seem to be paying off–for now.  The DOC has asked our U.S. extrusion industry to make the case to have our 232 aluminum extrusion tariffs put back in place.  In my webinar, I walked through the data they want us to provide.  Many of you have done so, and I thank you!  However, others haven’t yet done so.  We need you – all of you – to help in this effort.  We may not get another shot at this.  So, let’s get it done. The hope is that reinstatement of the 232 aluminum extrusion tariffs will dull the growing imports we are seeing.  I don’t think it will solve all our problems, but it may take some of the noise out of the system so we can see which countries are truly strategic threats.  I think we all agree that we should not initiate a trade case unless we...